Request a FREE, no obligation Aluminum Railing quote...

A measurement drawing of your project is NOT REQUIRED, but it really helps us give you the most accurate quote possible.

To make getting us a drawing as easy as possible, it need only be a simple hand-drawn layout with measurements, we provide three different methods:

upload a computer file drawing at the end of this form or e-mail it to us;
or fax us a hand-drawn or printed one; (Fax: 717-754-0137; alternate: 248-927-0368.)

Or, even better, faster and a lot more fun, you can draw your layout quickly and easily right here on our site.
Just click this pencil and draw away!!
You will then be able to come right back here to complete this Request for Quote.

Request Railing Quote Form
* = required

General Info: Please provide a first and last name. We do thousands of quotes and if we need to find yours, we need to look it up on our system by name. NONE OF YOUR INFORMATION WILL BE USED FOR ANYTHING OTHER THAN THIS QUOTE. You can view our Privacy Policy before proceeding.

*First Name: *Last Name:

*E-Mail: PLEASE make sure that your e-mail is correct or we won't be able to send you a quote
*E-Mail: (again, please!)

Phone: if we may contact you with questions.

*Your State: (for shipping calculations only)

Railing Info:

*What Type of Railing System?


Panel / Punched Post	Panel / Rail End	Post Top

*Select a Top Rail Style:

Franklin

Jefferson

Madison

Hamilton

*Style:

UAR-200-2R

UAR-200-3R

UAR-250-3R

UAR-250-3RS

*Grade:
Residential/Commercial with Square Balusters
Residential/Commercial with Monticello Balusters
Industrial with Square Balusters
Industrial with Monticello Balusters

*Select a Color:

White

Black

Beige

Bronze

Green

*Height: 36" 42"

*Total Linear Feet: (Not including stairs or gates, do include any flat railing footage for stair landings.)

Stair Footage and Angles Info:

Enter the Riser height, the Tread depth and the Number of Treads for each set of stairs and click Calculate.
(You can simply type in the Rail Length and Stair Angle, if you know them)

Stair Set #1: Railing on One Side Both Sides with an
Average Riser of: inches; average Tread of: inches; and # of Treads:
Rail Length is:   feet; Stair Angle is: degrees

Stair Set #2: Railing on One Side Both Sides with an
Average Riser of: inches; average Tread of: inches; and # of Treads:
Rail Length is:   feet; Stair Angle is:  degrees

Stair Set #3: Railing on One Side Both Sides with an
Average Riser of: inches; average Tread of: inches; and # of Treads:
Rail Length is:   feet; Stair Angle is:  degrees

Stair Set #4: Railing on One Side Both Sides with an
Average Riser of: inches; average Tread of: inches; and # of Treads:
Rail Length is:   feet; Stair Angle is:  degrees

Gate Info:

Gates:
(For sizes not shown, please specify width and quantity in Special Requirements below.)
Opening of 36" How Many:
Opening of 42" How Many:
Opening of 48" How Many:

Do the Gates need to be Tru•Close (self-closing)? Yes No
Do the Gates need to have a Z-Latch (self-latching)? Yes No

Post Info:

Do you need Flanges to attach the posts to concrete / decking?
(Click NO if you are core drilling or placing in new cement, etc.)
Yes No

Do you need to attach any railing panels to existing columns / walls as shown here?
If Yes, how many places: Note that this illustration shows One connection point, not Two.

Posts: (Optional: There is NO NEED TO SPECIFY THE POSTS if you are doing a Panel / Rail End or Post Top system, as all the posts will be Blank posts, OR if you are sending us a Drawing.)
Corner Posts Line Posts
Blank Posts End / Gate Posts (End and Gate posts are the same thing.)
3 Way Posts 4 Way Posts

Optional Info:

Layout Description / Special Requirements:

You can upload your drawing by using this Browse button. Please rename your file first to yourlastname.??? (no spaces in file name, please) where ??? is the type of file: .gif, .jpg, .doc, .xls, .pdf, .dwg, etc.

If you have any problems when trying to upload a file (like a request for a password), you can use our automatic e-mailer instead. Just click here and select the name of a drawing that you want to send us. It will be converted to a .pdf (Acrobat) file and automatically e-mailed to us. Be sure to then Submit this form as well.

Send it to us:

Would you please be so kind as to tell us how you found us?

If, after receiving your quote, you have questions or decide to order, please call the Specialist listed on your quote toll-free at 1-888-867-7995 to complete the order process.

If you would like to send us your measurement drawing, you can fax it to us at: 717-754-0137 or 248-927-0368.

There is a also a free .pdf printer driver that you can download and produce your own .pdf documents from almost any program. It's free if you want it!!

Payment may be made by cashier's check, or

by or